1- M.S. Safizadeh, A. Dadouche, J. Bird, W. Dmochowski, M. Martin, T. Breithaupt, and D.S. Forsyth, Development of PHM Methods for Roller Bearings Phase 1: Evaluation of the NDE techniques applicable to bearing condition monitoring, NRC Institute for Aerospa

2- Bird, J. Soung Yee, A., and Safizadeh, M.S., Assessment of Crack Detection Methods on Engine Rotor Disks, NRC Institute for Aerospace Report LTR-SMPL-2005-0028, 2005

3- Lepine, B.A., Forsyth, D. S., Brothers, M.R., Liu, Z., and Safizadeh, M.S., The Application and Assessment of NDI Methods for the Detection of Corrosion in Multi-Layer Aluminum Aircraft Fuselage Structures – Final Report for CFSD Phase 2 Task L – Part II.

4- Forsyth, D. S., Liao, M., Safizadeh, M., and Liu, Z., Variability in Life Cycle Maintenance Actions Due to Variability in Nondestructive Inspection of Corrosion Damage in Aircraft Fuselage Splice Joints, 2003

5- M.S. Safizadeh, D.S. Forsyth, A. Fahr, Development of a Software Package to Perform POD Analysis of a-hat versus a NDI Data. NRC LTR-SMPL-2002-0014, January 2002

6- M.S. Safizadeh, A. Fahr, Estimation of Crack Growth Curves Using Small Sets of Field Inspection Data. NRC LTR-SMPL-2001-0092, April 2001

7- M.S. Safizadeh, B.A. Lepine, D.S. Forsyth and A. Fahr, Time-Frequency Analysis of Pulsed Eddy Current Signals, NRC/IAR report SMPL-LTR-2000-0189, July 2000.

8- M.S. Safizadeh, A.A. Lakis, and M. Thomas, Application of Short-Time Fourier Transform in Machinery Fault Detection, Department of Mechanical Engineering, Ecole Polytechnique de Montréal, Technical Report No. EPM/RT-99/05, 1999.

9-M.S. Safizadeh, A.A. Lakis and M. Thomas, Fault Detection and Identification Using Wigner-Ville Distribution, Department of Mechanical Engineering, Ecole Polytechnique de Montréal, Technical Report No. EPM/RT-99/06, 1999.

10- M.S. Safizadeh, A.A. Lakis and M. Thomas, Condition Monitoring and Diagnostic of Rotating Machinery by Means of Wavelet Transforms, Department of Mechanical Engineering, Ecole Polytechnique de Montréal, Technical Report No. EPM/RT-99/07, 1999.

11- M.S. Safizadeh, A.A. Lakis and M. Thomas, Time-Frequency Algorithm, Department of Mechanical Engineering, Ecole Polytechnique de Montréal, Technical Report No. EPM/RT-99/08, 1999

S.A. Musavi vieri, M.S. Safizadeh, “Feasibility Study on Pulsed Eddy Current Application in Manufacturing Rail Equipments”, 2nd International Cnoference of Recent Advances in Railway Engineering (ICRARE 2009), 2009, Tehran, Iran. (in Persian)

M.S. Safizadeh, P. Asghari Fard, “Ball Bearing Condition Monitoring Used in Rail Industry via Multi Sensor Data Fusion”, 2nd International Cnoference of Recent Advances in Railway Engineering (ICRARE 2009), 2009, Tehran, Iran. (in Persian)

M.S. Safizadeh, H.R. Esrafili, “Design, Fabrication and Simulation of a NDT Measurement Probe to Locate Steel Bars in Concrete Columuns”, 17th Annual Conference on Mechanical Engineering (ISME 2009), 2009, Tehran, Iran. (in Persian)

P. Asghari Fard, M.S. Safizadeh, “Ball Bearing Fault Detection via Multi Sensor Data by Nondestructive Testing”, 17th Annual Conference on Mechanical Engineering (ISME 2009), 2009, Tehran, Iran. (in Persian)

M.S. Safizadeh, H.R. Esrafili, “Testing and Simulating the Frequency Effects on Equivalent Ohmic Resistance and Inductance of NDT Measurement Probe to Locate Steel Bars in Concrete Columns”, 9th Iranian International Conference of Manufacturing Engineering (ICME 2009), 2009, Birjand, Iran. (in Persian)

S.A. Musavi vieri, M.S. safizadeh, “Designing and Manufacturing of a Digital Pulsed Eddy Courrent System”, 9th Iranian International Conference of Manufacturing Engineering (ICME 2009), 2009, Birjand, Iran. (in Persian)

S.K. Latifi, M.S. Safizadeh, “Fault Diagnosis of Rolling Element Bearings Used in Aerospace Industry by Load Cell Sensor”, 8th Annual conference of Iranian Aerospace Society (IAS 2009), 2009, Tehran, Iran. (in Persian)

M. Khorasani, M.S. Safizadeh, “Design and Manufacturing Car TPS Wireless Sensor”, 2nd Annual International Conference on Automotive Electronics Industry (AEC 2009), 2009, Tehran, Iran. (in Persian)

A. Oulmane, A.A. Lakis, N. Mureithi, M.S. Safizadeh, “The Application of Time-Frequency Analysis in Rotating Machinery Fault Diagnostic” 22nd International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2009), 2009, San Sebastian, Spain.

M. Hashemi, M.S. safizadeh, “Design a Fuzzy Model Based on Vibration Signal Analysis to Auto Detect the Gear Faults”, 1st Conference on Riotating Equipment in Oil & Power Industries (Iran Rotate 2008), 2008, Tehran, Iran. (in Persian)

M.S. safizadeh, A.A. Lakis, M. Toorani, “Detection and Classification of Hidden Corrosion Using Intelligent Pulsed Eddy Current Technique”, Collloque Aquitqine-Quebec: Mecanique des Materiaux et des Structures Pour l’Aeronatique, 2008, ENSCPB, France.

A. Kahirdeh, M.S. Safizadeh, “Hierachical Clustering of Vibrational Features: a Method to Recognize Severity and Types of the Rolling Element Bearing’s Faults”, 16th International Conference on Mechanical Engineering (ISME 2008), 2008, Kerman, Iran.

A. Kahirdeh, M.S. Safizadeh, “Automatic Fault Diagnosis of Rolling Element Bearing via Component Analysis and Nonlinear Classifier”, 2nd Tehran International Congress on Manufacturing Engineering (TIMCE 2007), 2007, Tehran, Iran.

M.S. Safizadeh, “Rotating Machinery Diagnosis Using Time-Frequency Methods”, 2nd Tehran International Congress Manufacturing Engineering (TIMCE 2007), 2007, Tehran, Iran.

M.S. Safizadeh, A.A. Lakis, M. Thomas, “Machinery Diagnosis by Wavelet Analysis”, 20th International Congress on condition Monitoring and Diagnostic Engineering Management (COMADEM 2007), 2007, Faro, Portugal.

M.S. Safizadeh, “Application of Thermography Methods for the NDT of Structural composite”, 1st CNG Composite Cylinder Symposium, 2007, Tehran, Iran.

M.S. Safizadeh, “A Wavelet Based Technique for Machine Diagnostic”, 15th Annual International Conference on Mechanical Engineering (ISME 2007), 2007, Tehran, Iran.

M.S. Safizadeh, J. Bird, W. Dmochowski, D.S. Forsyth, “A Comparative Study of Air-Coupled Ultrasound Sensor and Accelerometer in Detecting Bearing Defects”, Proceedings of the World Tribology Congress III, 2005.

M.S. Safizadeh, Z. Liu, C. Mandache, D.S. Forsyth, and A. Fahr, “Automated Pulsed Eddy Current Method for Detection of Hidden Corrosion”, 5th IWASPNDE, 2005, Quebec, Canada.

David Forsyth, Saeed Safizadeh, Min Liao, Abbas Fahr , “NDT Reliability for Multi-dimensional Discontinuities”, 5th IWASPNDE, 2005, Quebec, Canada.

Liu, Z., Forsyth, D.S., Safizadeh, S., Genest, M., Fahr, A., and Marincak, “Fusion of Visual and Eddy Current Inspection Results for the Evaluation of Corrosion Damage in Aircraft Lap Joints”, SPIE, 2005, USA

D. Forsyth, and M-S. Safizadeh, “Reliability of Visual and Enhanced Visual Inspections of Helicopter Tail Rotor Blade”, 8th Joint NASA/FAA/DoD Conference on Aging Aircraft From 01/31/2005 To 02/03/2005

M.S. Safizadeh, Z. Liu, D.S. Forsyth, A. Fahr, “Automatic classification and Characterization of Hidden Corrosion Using Pulsed Eddy Current”, 16th World Conference on Nondestructive Testing, Montreal, Canada. 2004.

M.S. Safizadeh, D.S. Forsyth, Z. Liu, B.A. Lepine, M. Liao, “Pulsed Eddy Current Inspections of Aircraft Structures in Support of Holistic Damage Tolerance”, , SAE Aerospace Manufacturing Technology Conference (AMTC), Montreal, Canada. 2003.

Z. Liu, D. S. Forsyth, M. S. Safizadeh, B. A. Lepine, A. Fahr, “Quantitative Interpretation of Multi-frequency Eddy Current Data by Using Data Fusion Approaches”, SPIE’s 8th Annual International Symposium on NDE for Health Monitoring and Diagnostics, 2003

Z. Liu, D.S. Forsyth, B.A. Lepine, S. Safizadeh, A. Fahr, “Quantifying Aircraft Hidden Corrosion by Using Multi-modal NDT Techniques”, Review of Progress in Quantitative Nondestructive Evaluation, vol. 23, PP. 1355-1362, July 2003

Min Liao, D.S. Forsyth, J.P. Komorowski, M. Safizadeh, Z. Liu, and N.C. Bellinger, “Risk Analysis of Corrosion Maintenance Actions in Aircraft Structures”, The Proceeding of the 22nd Symposium of the International Committee on Aeronautical Fatigue, 2003

M.S. Safizadeh, A.A. Lakis, and M. Thomas, “Time-Frequency Algorithms and Their Applications, EUROMECH Colloquium 437 Identification and Updating Methods of Mechanical Structures”, 19th – 21th June 2002, Prague, Czech Republic.

M.S. Safizadeh, D.S. Forsyth, A. Fahr, “Recent Studies on the POD analysis of a-hat versus a NDI data”, Review of Progress in Quantitative Nondestructive Evaluation, vol. 22, PP. 1846-1853, July 2002

Z. Liu, D. S. Forsyth, M. S. Safizadeh, M. Genest, C. Mandache, and A. Fahr, “The Use of Locally Weighted Regression for the Data Fusion with Dempster-Shafer Theory”, 5th IWASPNDE, 2005, Quebec, Canada

Z. Liu, M. S. Safizadeh, D. S. Forsyth, B. A. Lepine, “Data Fusion Method for the Optimal Mixing of Multi-Frequency Eddy Current Signals”, Review of Progress in Quantitative Nondestructive Evaluation, vol. 22, PP. 577-584, 2002.

D. S. Forsyth, M. S. Safizadeh, A. Fahr, “Issues in the Determination of Probability of Detection Using Field Inspection Data”, Proceeding of the 3rd European-American Workshop on the Reliability of NDE and Demining, Berlin, 10-13 Sept. 2002

M.S. Safizadeh, A.A. Lakis, and M. Thomas, “, Rotating Machinery Fault Diagnosis Using Time-Frequency Methods”, 20th Machinery Vibration, Reliability and Maintenance Seminar and Annual General Meeting October 21 to 23, 2002 Quebec City.

M.S. Safizadeh, B.A. Lepine, D.S. Forsyth and A. Fahr, “Analysis of Pulsed Eddy Current Signals Using Time-Frequency Method”, Proceeding of the IV International Workshop on Advances in Signal Processing for Non Destructive Evaluation of Materials, 2001

M.S. Safizadeh, A.A. Lakis, and M. Thomas, “Diagnostic des Machines par les Méthodes Temps-Fréquence”, Annual Canadian Machinery Vibration Association Seminar, March 5 to 6, 2000, Ecole Technologie Supérieur, Montréal, Québec.

M.S. Safizadeh, A.A. Lakis, and M. Thomas, “Application of Short-Time Fourier Transform in Machine Fault Detection”, Proc. 12th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management, 1999