Dr. Farzad Bazdidi-Tehrani, Professor

Convection and Thermal Radiation Heat Transfer (Numerical and Experimental)
Cooling Techniques Related to Hot Sections in Gas Turbine Engines
Two-Phase Heat Transfer (Boiling and Condensation)

	E-mail: bazdid[AT]iust.ac.ir
	Phone: 98-21-77240540 Ex: 2927
	Fax: 98-21-77240488
	Zip Code: 16846-13114
	School of Mechanical Engineering, Iran University of Science & Technology, Tehran, Iran

	Virtual lab
	Research laboratory
	Scopus
	Scholar
	LinkedIn

Education

	PhD: School of Mechanical Engineering, The University of Leeds, U.K.
	MSc: Centre for Combustion & Energy, Department of Fuel and Energy, The University of Leeds, U.K.

Current Research

	Analysis of Flow and Heat Transfer in Relation to Cooling Techniques for Hot Sections in Gas Turbine Engines
	Combined Heat Transfer (Mixed Convection-Thermal Radiation) in macro and nano scales
	Analysis of Flow and Mass Transfer concerning Gaseous and Particle Dispersion around a Model Building

Graduate Theses (samples):

Abedinejad, M.S., “Analysis of Liquid Fuel Injection in a Model Combustion Chamber with the Aim of Reducing NO_x“, (Ph.D), 2018

Vasefi, S.I., “Analysis of Effective Parameters on Particle Dispersion and Turbulent Mixed Convection of Nanofluid”, (Ph.D), 2018

Moghaddam, S., “Analysis of Combined Turbulent Heat Transfer (Mixed Convection-Radiation) with Variable Properties in Channels using Large Eddy Simulation”, (Ph.D), 2017

Kiamansouri, M., “Analysis of Dynamic Global Sub-grid Scale Models for Large Eddy Simulation of Pollutant Dispersion around a Model Building”, (Ph.D), 2016

Jadidi, M., “Analysis of dynamic algebraic sub-grid scale heat flux models in large eddy simulation”, (Ph.D), ۲۰۱۴

Jahromi, M., “Analysis of unsteady turbulent flow in a pulsating synthetic jet”, (Ph.D), ۲۰۱۱

Rajabi-Zargarabadi, M., “Second moment closure modeling of turbulent flow and heat transfer in cooling techniques”, (Ph.D), ۲۰۰۹

Mohammadi, M., “Analysis of relations between entropy generation and emissions in a gas turbine model combustor”, (M.Sc.), 2019

Mirzaei, S., “Effect of fuel injection on reducing NO_x emissions in a gas turbine model combustor”, (M.Sc.), 2017

Hatami, M., “Analysis of Heat Transfer and Flow Field of a Synthetic Jet in the Presence of a Cross-Flow along with Modelling an Oscillating Actuator”, (M.Sc.), ۲۰۱۵

Mohammadi-Ahmar, A., “Dispersion Analysis of Exhaust Pollutant From the Vent of a Cubical Model Building by Non-Linear k-ε Turbulence Models and LES”, (M.Sc.), ۲۰۱۴

Aghaamini, M., “Analysis of Turbulent Combined Mixed Convection and Radiation Heat Transfer in a Vertical Channel”, (M.Sc.), ۲۰۱۴

Sedaghatnejad, M., “Simulation of Mixed Convection of Nanofluid Flow in Vertical Rectangular Duct with Asymmetric Boundary Condition”, (M.Sc.), ۲۰۱۴

Bohlooli, N., “Investigation of Turbulent Flow Coherent Structures in Film Cooling of Model Turbine Blade Leading Edge”, (M.Sc.), ۲۰۱۳

Ghafouri, A., “Effect of near-wall treatments and Evaluation of Grid Resolution in Large Eddy Simulation”, (M.Sc.), ۲۰۱۲

مشاهده بیشتر مشاهده کمتر

Courses Taught

	Course	Course Plan
Graduate	Advanced Heat Transfer (Convection)
Graduate	Advanced Heat Transfer (Thermal Radiation)
Graduate	Boundary Layers Theory
Undergraduate	Heat Transfer II
Undergraduate	Heat Transfer I
Undergraduate	Heat Transfer Laboratory
Undergraduate	Fluid Mechanics II
Undergraduate	Thermodynamics I

Publications

Bazdidi-Tehrani, F., and Safakish, A., ۲۰۱۱, “Mixed Convection and Thermal Radiation Heat Transfer in a Three Dimensional Vertical Channel with Different Walls Temperatures,” ۷ th International Conference on Computational Heat and Mass Transfer , Istanbul, Turkey, July.
Bazdidi-Tehrani, F., and Kamrava, M.H., ۲۰۱۱, ” Heat Transfer Analysis in a Conductive-Radiative Space Radiating Fin: Comparison with analytical solutions,” ۷ th International Conference on Computational Heat and Mass Transfer , Istanbul, Turkey, July.
Bazdidi-Tehrani, F., and Nazaripoor, H., ۲۰۱۱, “Buoyancy Assisted and Opposed Combined Mixed Convection-Radiation Heat Transfer in a Vertical Parallel Plate,” ۱۹ th Annual Conference on Mechanical Engineering (ISME۲۰۱۱), Birjand, Iran, May.
Bazdidi-Tehrani, F., and Kamrava, M.H., ۲۰۱۰, ” Combined Heat Transfer Calculations in a Fin-Tube Radiator with Temperature-Dependent Thermal Conductivity,” World Academy of Science, Engineering and Technology (WASET ۲۰۱۰), ۶۹, pp. ۱۷۶-۱۸۴, August.
Bazdidi-Tehrani , F., Khalili Param , H., and Jadidi, M., ۲۰۱۰, ” Influence of Supply Plenum on Jet Hole Flow Structure Applicable to Film Cooling: LES Approach,” ۱۸ th Annual International Conference on Mechanical Engineering (ISME۲۰۱۰), Sharif University of Technology, Tehran, Iran, May.
Zeinivand, H., and Bazdidi-Tehrani, F., ۲۰۱۰, “INFLUENCE OF SWIRL NUMBER ON NOX FORMATION IN A TURBULENT NON-PREMIXED FLAME,” Proceedings of the ASME ۱۰th Biennial Conference on Engineering Systems Design and Analysis, Istanbul, Turkey, July.
Bazdidi-Tehrani, F., Eghbali , A., and Karami, M., ۲۰۱۰, ” Instantaneous Heat Transfer Analysis of an Impinging Synthetic Jet via Vortex Trajectory: Effect of Diaphragm Vibration Frequency,” ۱۳ th Annual and ۲ nd International Fluid Dynamics conference, Shiraz, Iran, October.
Bazdidi-Tehrani, F., Foroutan, H., and Rajabi-Zargarabadi, M., ۲۰۰۹, ” First moment closure modeling of film cooling effectiveness in single row of cylindrical holes,” Int. Symp. on Heat Transfer in Gas Turbine Systems, Antalya, Turkey, August.
Bazdidi-Tehrani, F., and Rajabi-Zargarabadi, M., ۲۰۰۸ , ” Effect of Turbulent Heat Flux Models on Prediction of Film Cooling Characteristics, Proceedings of CHT-۰۸ (ICHMT) International Symposium on Advances in Computational Heat Transfer, Marrakech, Morocco, May.
Bazdidi-Tehrani, F., and Pezeshkpour, P., ۲۰۰۸, “Influence of Compound Angle Injection on Film Cooling through Two Staggered Rows of Holes,” International Conference on Fascinating Advancement in Mechanical Engineering (FAME۲۰۰۸), Mepco Schlenk Engineering College, Sivakasi, Tamilnadu, India, December.
Bazdidi-Tehrani, F., Jahromi, M., Karami, M., and Javadi, A., ۲۰۰۸, ” Numerical Analysis of a Zero Net Mass Flux Jet in a Quiescent Medium”, ۱۶th Annual Conference of the CFD Society Canada, University of Saskatchewan, Saskatoon, May.
Bazdidi-Tehrani, F., Foroutan, H., Rajabi-Zargarabadi, M., ۲۰۰۸, “Film Cooling Heat Transfer Predictions: Effects of Variable Turbulent Prandtl Number”, ۱۶th Annual Conference of the CFD Society Canada, University of Saskatchewan, Saskatoon, May.
Bazdidi-Tehrani, F., and Houshfar, E., ۲۰۰۶, “Numerical Analysis of Temperature & Flow Fields in the Single Row Film Cooling Technique Using Shaped (Elliptic) Holes,” The ۱۰th Annual Fluid Dynamics Conference, The Physical Society of Iran.
Bazdidi-Tehrani, F., and Houshfar, E., ۲۰۰۶, “Single Row of Film Cooling Shaped (Elliptic) Holes: A Numerical Simulation,” The ۱۴th Annual Conference and the ۱۰th International Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., Feizollahi, H., ۲۰۰۵, “Numerical Analysis of Opposed Rows of Coolant Jets Injected into a Heated Crossflow,” Proceedings of ۳rd Int. Conference on Advanced Computational Methods in Engineering (ACOMEN۲۰۰۵), Ghent, Belgium, May.
Bazdidi-Tehrani, F., and Sabbaghi, M., ۲۰۰۵, “Two-Dimensional Axisymmetric Analysis of Flow in the Diffuser-Combustor region of Gas Turbine Engine,” ۱۳th Annual Conference and the ۹th Int. Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., Feizollahi, H., and Jahromi, M., ۲۰۰۵, “Numerical Simulation of Flow and Temperature Fields for Opposed Rows of Coolant Jets,” ۱۳th Annual Conference and the ۹th Int. Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., Moslehishad, H., Rajabi-Zargarabadi, M., and Jahromi, M., ۲۰۰۵, “Numerical Simulation of Effects of Blowing Rate and Momentum Flux Ratios on Film Cooling Effectiveness,” ۱۳th Annual Conf. & ۹th Int. Conf. of Iranian Society of Mech. E
Yuan, Z., Mucciardi, F., and Bazdidi-Tehrani, F., ۲۰۰۴, “A Sensor for Continuous Temperature Measurement in Steel Making Environments,” Proceedings of the ۱۶th World Conference on Nondestructive Testing (۱۶wcndt), Montreal, Canada, August ۳۰-September ۳.
Bazdidi-Tehrani, F., and Rajabi-Zargarabadi, M., ۲۰۰۳, “Numerical Simulation of Combustion Phenomenon in a Model Combustion Chamber,” Proceedings of the Third Mediterranean Combustion Symposium, Marrakech, Morocco, June ۸-۱۳.
Bazdidi-Tehrani, F., and Jahromi, M., ۲۰۰۳, “Three-Dimensional Numerical Simulation of the Flow Inside a Model Gas Turbine Combustor,” Proceedings of the Eleventh Annual Conference of the CFD Society of Canada (CFD ۲۰۰۳), Vancouver, BC, Canada, May ۲۸-۳۰
Bazdidi-Tehrani, F., and Naderi, M., ۲۰۰۳, “Numerical Analysis of Laminar Heat Transfer in the Entrance Region of a Finned Horizontal Channel,” The ۱۱th Annual Conference and the ۷th International Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., and Rajabi-Zargarabadi, M., ۲۰۰۳, “Numerical Simulation of Combustion Phenomenon in a Sample Combustion Chamber Together With Radiation Modelling,” The ۱۱th Annual Conference and the ۷th International Conference of Iranian Society of
Bazdidi-Tehrani, F., Haghparast-Kashani, A., and Shahmir, A., ۲۰۰۳, “Numerical Analysis of Flowfield in the Dilution Zone of a Sample Gas Turbine Annular Combustion Chamber,” The ۴th Iranian Aerospace Society Conference.
Bazdidi-Tehrani, F., and Argian, J., ۲۰۰۲, “Numerical Analysis of Viscous ۳-D Turbine Cascade Flow in a Gas Turbine,” The ۱۰th Annual Conference and the ۶th International Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., and Shahmir, A., ۲۰۰۲, “Turbulent Mixing of a Single Row of Coolant Jets with a Hot Confined Crossflow: A Numerical Simulation,” Proceedings of the Ninth Asian Congress of Fluid Mechanics, Isfahan, Iran, May ۲۷-۳۱.
Bazdidi-Tehrani, F., and Jahromi, M., ۲۰۰۲, “Numerical Simulation of a Confined Swirling Flow in a Model Gas Turbine Combustor,” Proceedings of the Ninth Asian Congress of Fluid Mechanics, Isfahan, Iran, May ۲۷-۳۱.
Bazdidi-Tehrani, F., and Haghparast-Kashani, A., ۲۰۰۲, “CFD Analysis of a Single Three-Dimensional Jet Injected Normally into a Crossflow,” Proceedings of the Ninth Asian Congress of Fluid Mechanics, Isfahan, Iran, May ۲۷-۳۱.
Bazdidi-Tehrani, F., and Zaman, S., ۲۰۰۱, “Two-Phase Heat Transfer on an Isothermal Vertical Surface : A Numerical Simulation,” Proceedings of ۲nd International Symposium on Advances in Computational Heat Transfer, Palm Cove, Queensland, Australia, May ۲۰
Bazdidi-Tehrani,F., and Ghasemi, M., ۲۰۰۱, “Thermodynamic Analysis of a Heat Pipe,” The ۹th Annual Conference and the ۵th International Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., and Simonian, R., ۲۰۰۱, “Numerical Analysis of Condensation in Annular Flow in a Horizontal Tube,” The ۹th Annual Conference and the ۵th International Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., and Salehizadeh Manshadi, A., ۲۰۰۰, “Numerical Solution of Fluid Flow in the Entrance Region of a Finned, ۲-D Channel,” The ۸th Annual Conference and the ۴th International Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., and Mahmoodi, A.A., ۲۰۰۰, “Analysis of Flow and Temperature Fields in the Single Hole Film Cooling Technique,” The ۸th Annual Conference and The ۴th International Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., and Rezaei, M.T., ۱۹۹۸, “Numerical Analysis of Boiling Heat Transfer in Annular Flow in Vertical Tubes,” The ۶th Annual Conference and The ۳rd International Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., and Andrews, G.E., ۱۹۹۷, “Full Coverage Discrete Hole Film Cooling: Investigation of the Effect of Variable Density Ratio: Part-II,” Presented at the ASME Turbo Exposition, Orlando, Florida, June ۲-۵, ASME Paper No. ۹۷-GT-۳۴۱.
Bazdidi-Tehrani, F., and Dashti, A., ۱۹۹۷, “Numerical Analysis of Condensation Heat Transfer in Stratified Flow in Horizontal Tubes,” The ۵th Annual Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., and Ahmadian, M.T., ۱۹۹۷, ”Numerical Analysis of Slot Film Cooling in Turbulent Flow with Tangential Injection,” The ۵th Annual Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., and Haghighi, A., ۱۹۹۶, ”The Effect of Hole Size and The Number of Holes on The Cooling of Gas Turbine Combustors,” The ۴th Annual Conference and The ۲nd International Conference of Iranian Society of Mechanical Engineers.
Bazdidi-Tehrani, F., and Sarmadi, A., ۱۹۹۵, ”Heat Pump Design and Calculations with an Emphasis on Heat Transfer ,“ The ۳rd Annual Conference of Iranian Society of Mechanical Engineers.
Andrews, G.E., Khalifa, I.M., Asere, A.A., and Bazdidi-Tehrani, F., ۱۹۹۵, “Full Coverage Effusion Film Cooling With Inclined Holes,” ASME Paper No. ۹۵-GT-۲۷۴.
Rezaei, B., Bazdidi-Tehrani, F., and Ektesabi, M.R., ۱۹۹۲, “A Computer Program for Evaluation of Radiative Heat Flux in the Water-Tube Boilers,” The Annual Conference on Pressure Vessels & Boilers.
Andrews, G.E., and Bazdidi-Tehrani, F., ۱۹۹۲, “Impingement/ Effusion Cooling,” AGARD-CP-۵۲۷, ۱۹۹۲
Andrews, G.E., Bazdidi-Tehrani, F., Hussain, C.I., and Pearson, J.P., ۱۹۹۱, “Small Diameter Film Cooling Hole Heat Transfer: The Influence of the Hole Length,” ASME Paper No. ۹۱-GT-۳۴۴.
Andrews, G.E., and Bazdidi-Tehrani, F., ۱۹۸۹, “Small Diameter Film Cooling Hole Heat Transfer: The Influence of the Number of Holes,” ASME Paper No. ۸۹-GT-۷.
Andrews, G.E., Alikhanizadeh, M., Bazdidi-Tehrani, F., Hussain, C.I., and Khoshkbar Azari, M.S., ۱۹۸۷, “Small Diameter Film Cooling Holes: The Influence of Hole Size and Pitch,” ASME Paper No. ۸۷-HT-۲۸.

مشاهده بیشتر مشاهده کمتر

Turbulent Flow and Heat Transfer with Applications in a Pulsating Synthetic Jet (in Persian)
NanoFluids: Preparation Methods, Heat Transfer and Applications (in Persian)